产品详情
  • 产品名称:EP6112 Electro-Pneumatic Positioner

  • 产品型号:
  • 产品厂商:常阳
  • 产品价格:0
  • 折扣价格:0
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
EP6112 Electro-Pneumatic Positioner,EP6112 Electro-Pneumatic Positioner,它与气动调节阀、气动球阀、气动蝶阀等配套使用,把电动调节器的直流电流信号转换成气压力,控制阀门动作,
详情介绍:

EP6112 Electro-Pneumatic Positioner

常阳仪表供应EP6000系列电气阀门定位器有:EP-6111;EP-6121;EP-6122;EP-6112;EP-6211; EP-6221;EP-6222;EP-6212;EP-6221;EP-6311;EP-6321;EP-6322;EP-6312;EP6000系列电气阀门定位器以它与气动调节阀、气动球阀、气动蝶阀等配套使用,把电动调节器的直流电流信号转换成气压力,控制阀门动作,同时根据阀门的位移或转进行反馈,从而构成闭环控制回路。


EP6111 Electro-Pneumatic Positioner

EP6000-气定位器

1、概要

EP6000系列电气阀门定位器与气动执行机构配套使用,输入4~20mA DC的信号转换输出空气压力,控制执行机构的动作。同时根据执行机构的行程进行反馈,从而使执行机构的行程能按控制信号进行定位。

EP6000系列电气阀门定位器能用于单动作型和双动作型执行机构。

EP6000EP6111 Electro-Pneumatic Positioner

Electro-Pneumatic Positioner

1.       GENERAL

The EP 6000 Series Positioner,mounted on a pneumatic actuator,moves the actuator by receiving DC4~20mA signals from a controller.Also,the function of detecting and feeding back the actuator displacement provides accurate position in response to DC4~20mA signals.

The EP 6000 can be used with both single and double action on actuators.

2.       标准规格 2.STANDARD SPECIFICATIONS

2-1.编码 2-1.CODE NO.

6

 

 

 

 

     EP EP6111 Electro-Pneumatic Positioner

 

 

Series

6

0

0

0

 

 

 

 

 

防爆(防护)结构

Ex.enclosure

1

2

3

 

 

 

 

 

 

耐压防爆型(隔爆型)d ExdlllBT6 Explosion proof type

 

 

 

 

 

室外防水型(增安型)e ExellT6lP55 Weather proof type

 

 

 

 

 

本质**型(本安型)I ExiallCT6 Intrinsically safe explosion proof type

反馈(动作)方式

Feedback style

1

2

 

 

 

 

 

 

直行程执行机构用:标准型Linear:Feedback for standard lever

 

 

 

 

角行程(直连式回转轴)执行机构用:标准型Rotary:Feedback for lever

作用型式Action type

1

2

 

 

 

 

单动作型执行机构用(单作用)For single acting type

 

 

 

双动作型执行机构用(双作用)For double acting type

辅件Accessories

21

 

 

带关联匹配 气压控制器Matched decompressor valve

                     

 

例:Example:

EP  6111  表示 隔爆型、直行程、单作用、电气阀门定位器。

EP 6311: 表示 本安型、直行程、单作用、电气阀门定位器。

EP 6122: 表示 隔爆型、角行程、双作用、电气阀门定位器。

EP 6322: 表示 本安型、角行程、双作用、电气阀门定位器。

EP 6112: 表示 隔爆型、直行程、双作用、电气阀门定位器。

EP 6312: 表示 本安型、直行程、双作用、电气阀门定位器。

EP 6211: 表示 增安型、直行程、单作用、电气阀门定位器。

EP 6111-21:表示 隔爆型、直行程、单作用、电气阀门定位器带关联匹配组合 气压控制器。

注:耐压防爆型(隔爆型)的使用环境温度范围为-20~+80

本质**型(本安型)的使用环境温度范围为-40~+60℃。

In the case of explosion proof type,temperature range is -20~+80.

    In  the case of intrinsically safe explosion proof type,temperature range is -40~+60.

 

2-2.技术参数 2-2.TECHNICAL DATA

系  列 Series

EP 6000

输入信号 Input signal

4~20mA DC                  The split range is possible by span

可进行分程控制 adjustment and zero adjustment

调整范围:4~1212~20mA DC  Adjustment range:4~1212~20mA DC

输入阻抗Input impedance

250Ω±5%at25

输出特性Output Characteristic

线性(标准型)                Linear(standard)

放大器 Relay

单动作型执行机构和双动作型执行机构兼用,Non-bleeding type.

单动作正作用型放大器易变换成反作用型放 Single acting and double acting types

大器(输入信号增加,输出气压相应减小) are available.

气源压力 Air supply

0.14~0.7MPa(140~700KPa)

输出压力 Output pressure

0~0.7 MPa(0~700KPa)

耗气量 Air consumption

输出气压50%时的耗气量。 At output air pressure 50%

单动作型 Single acting type:5NI/min at 140 kpa air supply

双动作型 Double acting type:15NI/min at 400kpa air supply

大处理容量Max.capacity

输出侧气源放空时 Capacity when output is atmospheric venting.

单动作型 Single acting type:175NI/min at 140kpa air supply

双动作型 Double acting type:400NI/min at 400kpa air supply


 3、特点

适用于小容量及大容量的执行机构

由于采用了载荷控制弹簧,选择相应的弹簧后就能获得适合于该执行的定位器。

耗气量小

放大器的耗气量小、容量大。

可以选择输出特性

由于反馈机械中有凸轮装置,因此可以选择标准特性以外的输出特性。

各种反馈方式对应的型号

只要更换凸轮装置,就可以用于以下对应的执行机构。

*直行程执行机构:标准型∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ EP 6 1

*角行程执行机构:标准型∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ EP 6 2

易变换成反作用放大器

单作用执行机构在需要反作用控制时,正作用型放大器很容易变换成反作用型放大器。

耐压防爆型可在现场进行调整

由于信号(4~20mA.DC)输入端接头及线圈部位的封装呈耐压防爆结构,因此在进行检修及行程调整时,可以在现场防爆区域内拆除定位器外壳。

本质**的构造有着广阔的适用范围EP6111 Electro-Pneumatic Positioner

接线盒及线圈有着本质**型的构造,因此与专用的齐纳**栅组合使用能使力矩线圈适用于所有危险气体的场所(包括0区),使用环境温度范围为-40~+60

3.FEATURES

USABLE WITH SMALL AND LARGE CAPACITY ACTUATORS

By adjusting the built-in capacity control spring,the positioner can be made optimum to the given actuator.

LOW AIR CONSUMPTION

  The relay is low in air consumption and large in capacity.

OUTPUT CHARACTERISTICS SELECTABLE

  Having a cam within the feedback construction,choices other than the standard linear characteristic available.

COMPATIBLE WITH VARIOUS FEEDBACK TYPES

  Applicable to the following types by simply exchanging the cam block.

  *For Linear type actuator:Feedback for Standard lever type∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙EP 6 1

  *For Rotary type actuator:Feedback for Standard lever type∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙EP 6 2

REVERSE ACTION RELAY EASILY AVAILABLE

  The positive acting relay can be used as a reverse action relay when combined with a single acting actuator that requires a reverse action control.EP6111 Electro-Pneumatic Positioner

EXPLOSION PROOF STRUCTURE MARKING ON-SITE ADJUSTMENT POSSIBLE

  Explosion proof construction,with the terminal and coil blocks enclosed together in one package,makes it possible to remove the positioner cover for inside inspection or span adjustment even in an explosive ambient.

INTRINSICALLY SAFE CONSTRUCTION FOR A WIDE RANGE OF APPLICATIONS

  The intrinsically safe construction covers terminals and clil as one package.This,combined with the adoption of the specified zener barrier,makes the unit applicable in all hazardous gas location(including Class 0 zone)ranging from low(-40)to high(+60)temperature environment.

EP6112 Electro-Pneumatic Positioner

标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

苏公网安备32058102001207号